top of page

From Industrial Dye to Water Purifier: Turning a Mass-Produced Colorant into a Sunlight-Powered Pollutant Destroyer

5 hours ago
3 min read
"Faced with the global water pollution crisis, the UN's Sustainable Development Goal 6 calls for clean water and sanitation for all. To address this challenge, we developed together with researchers from France, Poland, Canada and South Korea an ecological, effective, and accessible photocatalyst for treating wastewater. The study shows that benzothioxanthene imide (BTI), a dye already produced by the ton, can be grafted onto cheap metal oxides to break down harmful micropollutants in water using nothing but ordinary visible light."

The problem: invisible pollution in our water

Clean-looking water can still be full of trouble. Traces of pharmaceuticals, pesticides, industrial dyes, and personal-care products (like the UV filters in sunscreen) end up in rivers, lakes, and even drinking water. These so-called micropollutants are found at extremely low concentrations, which makes them hard to remove — yet they can disrupt hormones, fuel antimicrobial resistance, and harm aquatic ecosystems. Conventional treatment plants were never designed to catch them.

Existing advanced treatments, such as photocatalysis with titanium dioxide, usually need UV light (expensive and energy-hungry) or metal-based catalysts that can themselves leach into the water — creating a secondary pollution problem while solving the first. Nanoparticle catalysts are also difficult to recover, so they risk becoming pollutants themselves.


The solution: a dye that eats pollution

In our new study published in Advanced Materials, we took an unexpected starting point: BTI, a brightly colored industrial dye that is already manufactured at ton scale. On its own, BTI is just a colorant. But when we chemically anchored it densely onto the surface of cheap, abundant oxide powders (alumina) or millimeter-sized zeolite beads (Fig. 1a), something remarkable happened.

Packed tightly together on the surface (Fig. 1b), the BTI molecules stop behaving like individual fluorescent dyes and instead form "dark" excited states. When lit by ordinary visible light — even a standard 20 W household LED bulb — these states transfer electrons to dissolved oxygen in the water, generating highly reactive species (hydroxyl and superoxide radicals) (Fig. 1c). These radicals tear apart pollutant molecules step by step, ultimately converting them into CO₂ and CO (Fig. 1d). No UV, no added chemicals, no metal co-catalysts.

The results speak for themselves:

  • 18 different contaminants — dyes, painkillers, antibiotics, hormones, sunscreen ingredients, insecticides — were degraded to below detection limits, in tap water and even seawater.

  • The catalyst survived 36 reuse cycles and 12 months of continuous operation with no loss of activity, no leaching, and no structural change.

  • In a pilot-scale flow reactor packed with millimeter-sized BTI-functionalized beads (Fig. 1e), a real commercial dye mixture in tap water was cleaned under ambient conditions — no stirring, no special equipment.

Because the active layer is chemically bonded to macroscopic beads, the catalyst is simply filtered out and reused — solving the recovery problem that plagues nanoparticle systems.

Figure 1. Turning a industrial dye into a photocatalyst. a) Synthesis of BTI grafted on alumina. b) computational model of tightly grafted BTI molecules on an alumina surface. c) Catalytic cycle for the reactive oxygen species generation. d) Decomposition of a rhodamine B solution – left: photograph of decomposed rhodamine B at the interface to the particles under ambient light irradiation, middle: operando-UV/vis monitoring, right: gas chromatogram of fully decomposed rhodamine B to CO and CO2. e) Pilot-scale flow reactor for the decomposition of a real dye mixture afer a cloth dying process in tap water.
Figure 1. Turning a industrial dye into a photocatalyst. a) Synthesis of BTI grafted on alumina. b) computational model of tightly grafted BTI molecules on an alumina surface. c) Catalytic cycle for the reactive oxygen species generation. d) Decomposition of a rhodamine B solution – left: photograph of decomposed rhodamine B at the interface to the particles under ambient light irradiation, middle: operando-UV/vis monitoring, right: gas chromatogram of fully decomposed rhodamine B to CO and CO2. e) Pilot-scale flow reactor for the decomposition of a real dye mixture afer a cloth dying process in tap water.

The broader implication: clean water that scales

The big picture is about sustainability and accessibility. The ingredients are cheap and abundant; the synthesis uses only green solvents; the energy source is visible light; and the format is modular — from fine powders for batch treatment to beads for cartridge-style flow reactors that could slot into existing wastewater infrastructure.

That combination makes this platform especially promising for decentralized, on-site water purification in resource-limited settings, where centralized treatment plants are unavailable and sunlight is plentiful. More philosophically, it's a nice example of "using waste to treat waste": a mass-produced industrial dye becomes the active ingredient in a durable, sunlight-driven water purifier.


This article was published in Adv. Mater.

Comments


Lungerich Lab

+33 (0)5 6752 4328

dominik.lungerich(at)cemes.fr

​

CEMES, CNRS UPR 8011, Université de Toulouse

29 rue Jeanne Marvig – BP94347
31055 Toulouse, Cedex 4, France

Follow Us On:

  • LinkedIn
  • Twitter
Cemes - Logo - V2 - Orange.png
LOGO_CNRS_2019_RVB_edited.png

© 2023 Lungerich Group

bottom of page